Syncing current state.
This commit is contained in:
770
roles/Geth-Hub/files/motion.conf
Normal file
770
roles/Geth-Hub/files/motion.conf
Normal file
@@ -0,0 +1,770 @@
|
||||
# Rename this distribution example file to motion.conf
|
||||
#
|
||||
# This config file was generated by motion 4.0.1
|
||||
|
||||
|
||||
############################################################
|
||||
# Daemon
|
||||
############################################################
|
||||
|
||||
# Start in daemon (background) mode and release terminal (default: off)
|
||||
daemon on
|
||||
|
||||
# File to store the process ID, also called pid file. (default: not defined)
|
||||
process_id_file /var/run/motion/motion.pid
|
||||
|
||||
############################################################
|
||||
# Basic Setup Mode
|
||||
############################################################
|
||||
|
||||
# Start in Setup-Mode, daemon disabled. (default: off)
|
||||
setup_mode off
|
||||
|
||||
|
||||
# Use a file to save logs messages, if not defined stderr and syslog is used. (default: not defined)
|
||||
;logfile /tmp/motion.log
|
||||
|
||||
# Level of log messages [1..9] (EMG, ALR, CRT, ERR, WRN, NTC, INF, DBG, ALL). (default: 6 / NTC)
|
||||
log_level 6
|
||||
|
||||
# Filter to log messages by type (COR, STR, ENC, NET, DBL, EVT, TRK, VID, ALL). (default: ALL)
|
||||
log_type all
|
||||
|
||||
###########################################################
|
||||
# Capture device options
|
||||
############################################################
|
||||
|
||||
# Videodevice to be used for capturing (default /dev/video0)
|
||||
# for FreeBSD default is /dev/bktr0
|
||||
videodevice /dev/video0
|
||||
|
||||
# v4l2_palette allows one to choose preferable palette to be use by motion
|
||||
# to capture from those supported by your videodevice. (default: 17)
|
||||
# E.g. if your videodevice supports both V4L2_PIX_FMT_SBGGR8 and
|
||||
# V4L2_PIX_FMT_MJPEG then motion will by default use V4L2_PIX_FMT_MJPEG.
|
||||
# Setting v4l2_palette to 2 forces motion to use V4L2_PIX_FMT_SBGGR8
|
||||
# instead.
|
||||
#
|
||||
# Values :
|
||||
# V4L2_PIX_FMT_SN9C10X : 0 'S910'
|
||||
# V4L2_PIX_FMT_SBGGR16 : 1 'BYR2'
|
||||
# V4L2_PIX_FMT_SBGGR8 : 2 'BA81'
|
||||
# V4L2_PIX_FMT_SPCA561 : 3 'S561'
|
||||
# V4L2_PIX_FMT_SGBRG8 : 4 'GBRG'
|
||||
# V4L2_PIX_FMT_SGRBG8 : 5 'GRBG'
|
||||
# V4L2_PIX_FMT_PAC207 : 6 'P207'
|
||||
# V4L2_PIX_FMT_PJPG : 7 'PJPG'
|
||||
# V4L2_PIX_FMT_MJPEG : 8 'MJPEG'
|
||||
# V4L2_PIX_FMT_JPEG : 9 'JPEG'
|
||||
# V4L2_PIX_FMT_RGB24 : 10 'RGB3'
|
||||
# V4L2_PIX_FMT_SPCA501 : 11 'S501'
|
||||
# V4L2_PIX_FMT_SPCA505 : 12 'S505'
|
||||
# V4L2_PIX_FMT_SPCA508 : 13 'S508'
|
||||
# V4L2_PIX_FMT_UYVY : 14 'UYVY'
|
||||
# V4L2_PIX_FMT_YUYV : 15 'YUYV'
|
||||
# V4L2_PIX_FMT_YUV422P : 16 '422P'
|
||||
# V4L2_PIX_FMT_YUV420 : 17 'YU12'
|
||||
#
|
||||
v4l2_palette 17
|
||||
|
||||
# Tuner device to be used for capturing using tuner as source (default /dev/tuner0)
|
||||
# This is ONLY used for FreeBSD. Leave it commented out for Linux
|
||||
; tunerdevice /dev/tuner0
|
||||
|
||||
# The video input to be used (default: -1)
|
||||
# Should normally be set to 0 or 1 for video/TV cards, and -1 for USB cameras
|
||||
# Set to 0 for uvideo(4) on OpenBSD
|
||||
input -1
|
||||
|
||||
# The video norm to use (only for video capture and TV tuner cards)
|
||||
# Values: 0 (PAL), 1 (NTSC), 2 (SECAM), 3 (PAL NC no colour). Default: 0 (PAL)
|
||||
norm 0
|
||||
|
||||
# The frequency to set the tuner to (kHz) (only for TV tuner cards) (default: 0)
|
||||
frequency 0
|
||||
|
||||
# Override the power line frequency for the webcam. (normally not necessary)
|
||||
# Values:
|
||||
# -1 : Do not modify device setting
|
||||
# 0 : Power line frequency Disabled
|
||||
# 1 : 50hz
|
||||
# 2 : 60hz
|
||||
# 3 : Auto
|
||||
power_line_frequency -1
|
||||
|
||||
# Rotate image this number of degrees. The rotation affects all saved images as
|
||||
# well as movies. Valid values: 0 (default = no rotation), 90, 180 and 270.
|
||||
rotate 0
|
||||
|
||||
# Image width (pixels). Valid range: Camera dependent, default: 352
|
||||
width 640
|
||||
|
||||
# Image height (pixels). Valid range: Camera dependent, default: 288
|
||||
height 480
|
||||
|
||||
# Maximum number of frames to be captured per second.
|
||||
# Valid range: 2-100. Default: 100 (almost no limit).
|
||||
framerate 100
|
||||
|
||||
# Minimum time in seconds between capturing picture frames from the camera.
|
||||
# Default: 0 = disabled - the capture rate is given by the camera framerate.
|
||||
# This option is used when you want to capture images at a rate lower than 2 per second.
|
||||
minimum_frame_time 0
|
||||
|
||||
# URL to use if you are using a network camera, size will be autodetected (incl http:// ftp:// mjpg:// rtsp:// mjpeg:// or file:///)
|
||||
# Must be a URL that returns single jpeg pictures or a raw mjpeg stream. A trailing slash may be required for some cameras.
|
||||
# Default: Not defined
|
||||
; netcam_url value
|
||||
|
||||
# Username and password for network camera (only if required). Default: not defined
|
||||
# Syntax is user:password
|
||||
; netcam_userpass value
|
||||
|
||||
# The setting for keep-alive of network socket, should improve performance on compatible net cameras.
|
||||
# off: The historical implementation using HTTP/1.0, closing the socket after each http request.
|
||||
# force: Use HTTP/1.0 requests with keep alive header to reuse the same connection.
|
||||
# on: Use HTTP/1.1 requests that support keep alive as default.
|
||||
# Default: off
|
||||
netcam_keepalive off
|
||||
|
||||
# URL to use for a netcam proxy server, if required, e.g. "http://myproxy".
|
||||
# If a port number other than 80 is needed, use "http://myproxy:1234".
|
||||
# Default: not defined
|
||||
; netcam_proxy value
|
||||
|
||||
# Set less strict jpeg checks for network cameras with a poor/buggy firmware.
|
||||
# Default: off
|
||||
netcam_tolerant_check off
|
||||
|
||||
# RTSP connection uses TCP to communicate to the camera. Can prevent image corruption.
|
||||
# Default: on
|
||||
rtsp_uses_tcp on
|
||||
|
||||
# Name of camera to use if you are using a camera accessed through OpenMax/MMAL
|
||||
# Default: Not defined
|
||||
; mmalcam_name vc.ril.camera
|
||||
|
||||
# Camera control parameters (see raspivid/raspistill tool documentation)
|
||||
# Default: Not defined
|
||||
; mmalcam_control_params -hf
|
||||
|
||||
# Let motion regulate the brightness of a video device (default: off).
|
||||
# The auto_brightness feature uses the brightness option as its target value.
|
||||
# If brightness is zero auto_brightness will adjust to average brightness value 128.
|
||||
# Only recommended for cameras without auto brightness
|
||||
auto_brightness off
|
||||
|
||||
# Set the initial brightness of a video device.
|
||||
# If auto_brightness is enabled, this value defines the average brightness level
|
||||
# which Motion will try and adjust to.
|
||||
# Valid range 0-255, default 0 = disabled
|
||||
brightness 0
|
||||
|
||||
# Set the contrast of a video device.
|
||||
# Valid range 0-255, default 0 = disabled
|
||||
contrast 0
|
||||
|
||||
# Set the saturation of a video device.
|
||||
# Valid range 0-255, default 0 = disabled
|
||||
saturation 0
|
||||
|
||||
# Set the hue of a video device (NTSC feature).
|
||||
# Valid range 0-255, default 0 = disabled
|
||||
hue 0
|
||||
|
||||
|
||||
############################################################
|
||||
# Round Robin (multiple inputs on same video device name)
|
||||
############################################################
|
||||
|
||||
# Number of frames to capture in each roundrobin step (default: 1)
|
||||
roundrobin_frames 1
|
||||
|
||||
# Number of frames to skip before each roundrobin step (default: 1)
|
||||
roundrobin_skip 1
|
||||
|
||||
# Try to filter out noise generated by roundrobin (default: off)
|
||||
switchfilter off
|
||||
|
||||
|
||||
############################################################
|
||||
# Motion Detection Settings:
|
||||
############################################################
|
||||
|
||||
# Threshold for number of changed pixels in an image that
|
||||
# triggers motion detection (default: 1500)
|
||||
threshold 1500
|
||||
|
||||
# Automatically tune the threshold down if possible (default: off)
|
||||
threshold_tune off
|
||||
|
||||
# Noise threshold for the motion detection (default: 32)
|
||||
noise_level 32
|
||||
|
||||
# Automatically tune the noise threshold (default: on)
|
||||
noise_tune on
|
||||
|
||||
# Despeckle motion image using (e)rode or (d)ilate or (l)abel (Default: not defined)
|
||||
# Recommended value is EedDl. Any combination (and number of) of E, e, d, and D is valid.
|
||||
# (l)abeling must only be used once and the 'l' must be the last letter.
|
||||
# Comment out to disable
|
||||
despeckle_filter EedDl
|
||||
|
||||
# Detect motion in predefined areas (1 - 9). Areas are numbered like that: 1 2 3
|
||||
# A script (on_area_detected) is started immediately when motion is 4 5 6
|
||||
# detected in one of the given areas, but only once during an event. 7 8 9
|
||||
# One or more areas can be specified with this option. Take care: This option
|
||||
# does NOT restrict detection to these areas! (Default: not defined)
|
||||
; area_detect value
|
||||
|
||||
# PGM file to use as a sensitivity mask.
|
||||
# Full path name to. (Default: not defined)
|
||||
; mask_file value
|
||||
|
||||
# Dynamically create a mask file during operation (default: 0)
|
||||
# Adjust speed of mask changes from 0 (off) to 10 (fast)
|
||||
smart_mask_speed 0
|
||||
|
||||
# Ignore sudden massive light intensity changes given as a percentage of the picture
|
||||
# area that changed intensity. Valid range: 0 - 100 , default: 0 = disabled
|
||||
lightswitch 0
|
||||
|
||||
# Picture frames must contain motion at least the specified number of frames
|
||||
# in a row before they are detected as true motion. At the default of 1, all
|
||||
# motion is detected. Valid range: 1 to thousands, recommended 1-5
|
||||
minimum_motion_frames 1
|
||||
|
||||
# Specifies the number of pre-captured (buffered) pictures from before motion
|
||||
# was detected that will be output at motion detection.
|
||||
# Recommended range: 0 to 5 (default: 0)
|
||||
# Do not use large values! Large values will cause Motion to skip video frames and
|
||||
# cause unsmooth movies. To smooth movies use larger values of post_capture instead.
|
||||
pre_capture 0
|
||||
|
||||
# Number of frames to capture after motion is no longer detected (default: 0)
|
||||
post_capture 0
|
||||
|
||||
# Event Gap is the seconds of no motion detection that triggers the end of an event.
|
||||
# An event is defined as a series of motion images taken within a short timeframe.
|
||||
# Recommended value is 60 seconds (Default). The value -1 is allowed and disables
|
||||
# events causing all Motion to be written to one single movie file and no pre_capture.
|
||||
# If set to 0, motion is running in gapless mode. Movies don't have gaps anymore. An
|
||||
# event ends right after no more motion is detected and post_capture is over.
|
||||
event_gap 60
|
||||
|
||||
# Maximum length in seconds of a movie
|
||||
# When value is exceeded a new movie file is created. (Default: 0 = infinite)
|
||||
max_movie_time 0
|
||||
|
||||
# Always save images even if there was no motion (default: off)
|
||||
emulate_motion off
|
||||
|
||||
|
||||
############################################################
|
||||
# Image File Output
|
||||
############################################################
|
||||
|
||||
# Output 'normal' pictures when motion is detected (default: on)
|
||||
# Valid values: on, off, first, best, center
|
||||
# When set to 'first', only the first picture of an event is saved.
|
||||
# Picture with most motion of an event is saved when set to 'best'.
|
||||
# Picture with motion nearest center of picture is saved when set to 'center'.
|
||||
# Can be used as preview shot for the corresponding movie.
|
||||
output_pictures off
|
||||
|
||||
# Output pictures with only the pixels moving object (ghost images) (default: off)
|
||||
output_debug_pictures off
|
||||
|
||||
# The quality (in percent) to be used by the jpeg compression (default: 75)
|
||||
quality 75
|
||||
|
||||
# Type of output images
|
||||
# Valid values: jpeg, ppm (default: jpeg)
|
||||
picture_type jpeg
|
||||
|
||||
############################################################
|
||||
# FFMPEG related options
|
||||
# Film (movies) file output, and deinterlacing of the video input
|
||||
# The options movie_filename and timelapse_filename are also used
|
||||
# by the ffmpeg feature
|
||||
############################################################
|
||||
|
||||
# Use ffmpeg to encode movies in realtime (default: off)
|
||||
ffmpeg_output_movies off
|
||||
|
||||
# Use ffmpeg to make movies with only the pixels moving
|
||||
# object (ghost images) (default: off)
|
||||
ffmpeg_output_debug_movies off
|
||||
|
||||
# Use ffmpeg to encode a timelapse movie
|
||||
# Default value 0 = off - else save frame every Nth second
|
||||
ffmpeg_timelapse 0
|
||||
|
||||
# The file rollover mode of the timelapse video
|
||||
# Valid values: hourly, daily (default), weekly-sunday, weekly-monday, monthly, manual
|
||||
ffmpeg_timelapse_mode daily
|
||||
|
||||
# Bitrate to be used by the ffmpeg encoder (default: 400000)
|
||||
# This option is ignored if ffmpeg_variable_bitrate is not 0 (disabled)
|
||||
ffmpeg_bps 400000
|
||||
|
||||
# Enables and defines variable bitrate for the ffmpeg encoder.
|
||||
# ffmpeg_bps is ignored if variable bitrate is enabled.
|
||||
# Valid values: 0 (default) = fixed bitrate defined by ffmpeg_bps,
|
||||
# or the range 1 - 100 where 1 means worst quality and 100 is best.
|
||||
ffmpeg_variable_bitrate 0
|
||||
|
||||
# Codec to used by ffmpeg for the video compression.
|
||||
# Timelapse videos have two options.
|
||||
# mpg - Creates mpg file with mpeg-2 encoding.
|
||||
# If motion is shutdown and restarted, new pics will be appended
|
||||
# to any previously created file with name indicated for timelapse.
|
||||
# mpeg4 - Creates avi file with the default encoding.
|
||||
# If motion is shutdown and restarted, new pics will create a
|
||||
# new file with the name indicated for timelapse.
|
||||
# Supported formats are:
|
||||
# mpeg4 or msmpeg4 - gives you files with extension .avi
|
||||
# msmpeg4 is recommended for use with Windows Media Player because
|
||||
# it requires no installation of codec on the Windows client.
|
||||
# swf - gives you a flash film with extension .swf
|
||||
# flv - gives you a flash video with extension .flv
|
||||
# ffv1 - FF video codec 1 for Lossless Encoding
|
||||
# mov - QuickTime
|
||||
# mp4 - MPEG-4 Part 14 H264 encoding
|
||||
# mkv - Matroska H264 encoding
|
||||
# hevc - H.265 / HEVC (High Efficiency Video Coding)
|
||||
ffmpeg_video_codec mpeg4
|
||||
|
||||
# When creating videos, should frames be duplicated in order
|
||||
# to keep up with the requested frames per second
|
||||
# (default: true)
|
||||
ffmpeg_duplicate_frames true
|
||||
|
||||
############################################################
|
||||
# SDL Window
|
||||
############################################################
|
||||
|
||||
# Number of motion thread to show in SDL Window (default: 0 = disabled)
|
||||
#sdl_threadnr 0
|
||||
|
||||
############################################################
|
||||
# External pipe to video encoder
|
||||
# Replacement for FFMPEG builtin encoder for ffmpeg_output_movies only.
|
||||
# The options movie_filename and timelapse_filename are also used
|
||||
# by the ffmpeg feature
|
||||
#############################################################
|
||||
|
||||
# Bool to enable or disable extpipe (default: off)
|
||||
use_extpipe off
|
||||
|
||||
# External program (full path and opts) to pipe raw video to
|
||||
# Generally, use '-' for STDIN...
|
||||
;extpipe mencoder -demuxer rawvideo -rawvideo w=%w:h=%h:i420 -ovc x264 -x264encopts bframes=4:frameref=1:subq=1:scenecut=-1:nob_adapt:threads=1:keyint=1000:8x8dct:vbv_bufsize=4000:crf=24:partitions=i8x8,i4x4:vbv_maxrate=800:no-chroma-me -vf denoise3d=16:12:48:4,pp=lb -of avi -o %f.avi - -fps %fps
|
||||
;extpipe x264 - --input-res %wx%h --fps %fps --bitrate 2000 --preset ultrafast --quiet -o %f.mp4
|
||||
;extpipe mencoder -demuxer rawvideo -rawvideo w=%w:h=%h:fps=%fps -ovc x264 -x264encopts preset=ultrafast -of lavf -o %f.mp4 - -fps %fps
|
||||
;extpipe ffmpeg -y -f rawvideo -pix_fmt yuv420p -video_size %wx%h -framerate %fps -i pipe:0 -vcodec libx264 -preset ultrafast -f mp4 %f.mp4
|
||||
|
||||
|
||||
############################################################
|
||||
# Snapshots (Traditional Periodic Webcam File Output)
|
||||
############################################################
|
||||
|
||||
# Make automated snapshot every N seconds (default: 0 = disabled)
|
||||
snapshot_interval 0
|
||||
|
||||
|
||||
############################################################
|
||||
# Text Display
|
||||
# %Y = year, %m = month, %d = date,
|
||||
# %H = hour, %M = minute, %S = second, %T = HH:MM:SS,
|
||||
# %v = event, %q = frame number, %t = camera id number,
|
||||
# %D = changed pixels, %N = noise level, \n = new line,
|
||||
# %i and %J = width and height of motion area,
|
||||
# %K and %L = X and Y coordinates of motion center
|
||||
# %C = value defined by text_event - do not use with text_event!
|
||||
# You can put quotation marks around the text to allow
|
||||
# leading spaces
|
||||
############################################################
|
||||
|
||||
# Locate and draw a box around the moving object.
|
||||
# Valid values: on, off, preview (default: off)
|
||||
# Set to 'preview' will only draw a box in preview_shot pictures.
|
||||
locate_motion_mode off
|
||||
|
||||
# Set the look and style of the locate box if enabled.
|
||||
# Valid values: box, redbox, cross, redcross (default: box)
|
||||
# Set to 'box' will draw the traditional box.
|
||||
# Set to 'redbox' will draw a red box.
|
||||
# Set to 'cross' will draw a little cross to mark center.
|
||||
# Set to 'redcross' will draw a little red cross to mark center.
|
||||
locate_motion_style box
|
||||
|
||||
# Draws the timestamp using same options as C function strftime(3)
|
||||
# Default: %Y-%m-%d\n%T = date in ISO format and time in 24 hour clock
|
||||
# Text is placed in lower right corner
|
||||
text_right %Y-%m-%d\n%T-%q
|
||||
|
||||
# Draw a user defined text on the images using same options as C function strftime(3)
|
||||
# Default: Not defined = no text
|
||||
# Text is placed in lower left corner
|
||||
; text_left CAMERA %t
|
||||
|
||||
# Draw the number of changed pixed on the images (default: off)
|
||||
# Will normally be set to off except when you setup and adjust the motion settings
|
||||
# Text is placed in upper right corner
|
||||
text_changes off
|
||||
|
||||
# This option defines the value of the special event conversion specifier %C
|
||||
# You can use any conversion specifier in this option except %C. Date and time
|
||||
# values are from the timestamp of the first image in the current event.
|
||||
# Default: %Y%m%d%H%M%S
|
||||
# The idea is that %C can be used filenames and text_left/right for creating
|
||||
# a unique identifier for each event.
|
||||
text_event %Y%m%d%H%M%S
|
||||
|
||||
# Draw characters at twice normal size on images. (default: off)
|
||||
text_double off
|
||||
|
||||
|
||||
# Text to include in a JPEG EXIF comment
|
||||
# May be any text, including conversion specifiers.
|
||||
# The EXIF timestamp is included independent of this text.
|
||||
;exif_text %i%J/%K%L
|
||||
|
||||
############################################################
|
||||
# Target Directories and filenames For Images And Films
|
||||
# For the options snapshot_, picture_, movie_ and timelapse_filename
|
||||
# you can use conversion specifiers
|
||||
# %Y = year, %m = month, %d = date,
|
||||
# %H = hour, %M = minute, %S = second,
|
||||
# %v = event, %q = frame number, %t = camera id number,
|
||||
# %D = changed pixels, %N = noise level,
|
||||
# %i and %J = width and height of motion area,
|
||||
# %K and %L = X and Y coordinates of motion center
|
||||
# %C = value defined by text_event
|
||||
# Quotation marks round string are allowed.
|
||||
############################################################
|
||||
|
||||
# Target base directory for pictures and films
|
||||
# Recommended to use absolute path. (Default: current working directory)
|
||||
target_dir /var/run/motion/capture
|
||||
|
||||
# File path for snapshots (jpeg or ppm) relative to target_dir
|
||||
# Default: %v-%Y%m%d%H%M%S-snapshot
|
||||
# Default value is equivalent to legacy oldlayout option
|
||||
# For Motion 3.0 compatible mode choose: %Y/%m/%d/%H/%M/%S-snapshot
|
||||
# File extension .jpg or .ppm is automatically added so do not include this.
|
||||
# Note: A symbolic link called lastsnap.jpg created in the target_dir will always
|
||||
# point to the latest snapshot, unless snapshot_filename is exactly 'lastsnap'
|
||||
snapshot_filename %v-%Y%m%d%H%M%S-snapshot
|
||||
|
||||
# File path for motion triggered images (jpeg or ppm) relative to target_dir
|
||||
# Default: %v-%Y%m%d%H%M%S-%q
|
||||
# Default value is equivalent to legacy oldlayout option
|
||||
# For Motion 3.0 compatible mode choose: %Y/%m/%d/%H/%M/%S-%q
|
||||
# File extension .jpg or .ppm is automatically added so do not include this
|
||||
# Set to 'preview' together with best-preview feature enables special naming
|
||||
# convention for preview shots. See motion guide for details
|
||||
picture_filename %v-%Y%m%d%H%M%S-%q
|
||||
|
||||
# File path for motion triggered ffmpeg films (movies) relative to target_dir
|
||||
# Default: %v-%Y%m%d%H%M%S
|
||||
# File extensions(.mpg .avi) are automatically added so do not include them
|
||||
movie_filename %v-%Y%m%d%H%M%S
|
||||
|
||||
# File path for timelapse movies relative to target_dir
|
||||
# Default: %Y%m%d-timelapse
|
||||
# File extensions(.mpg .avi) are automatically added so do not include them
|
||||
timelapse_filename %Y%m%d-timelapse
|
||||
|
||||
############################################################
|
||||
# Global Network Options
|
||||
############################################################
|
||||
# Enable IPv6 (default: off)
|
||||
ipv6_enabled off
|
||||
|
||||
############################################################
|
||||
# Live Stream Server
|
||||
############################################################
|
||||
|
||||
# The mini-http server listens to this port for requests (default: 0 = disabled)
|
||||
stream_port 8081
|
||||
|
||||
# Quality of the jpeg (in percent) images produced (default: 50)
|
||||
stream_quality 50
|
||||
|
||||
# Output frames at 1 fps when no motion is detected and increase to the
|
||||
# rate given by stream_maxrate when motion is detected (default: off)
|
||||
stream_motion off
|
||||
|
||||
# Maximum framerate for stream streams (default: 1)
|
||||
stream_maxrate 1
|
||||
|
||||
# Restrict stream connections to localhost only (default: on)
|
||||
stream_localhost off
|
||||
|
||||
# Limits the number of images per connection (default: 0 = unlimited)
|
||||
# Number can be defined by multiplying actual stream rate by desired number of seconds
|
||||
# Actual stream rate is the smallest of the numbers framerate and stream_maxrate
|
||||
stream_limit 0
|
||||
|
||||
# Set the authentication method (default: 0)
|
||||
# 0 = disabled
|
||||
# 1 = Basic authentication
|
||||
# 2 = MD5 digest (the safer authentication)
|
||||
stream_auth_method 0
|
||||
|
||||
# Authentication for the stream. Syntax username:password
|
||||
# Default: not defined (Disabled)
|
||||
; stream_authentication username:password
|
||||
|
||||
# Percentage to scale the stream image for preview
|
||||
# Default: 25
|
||||
; stream_preview_scale 25
|
||||
|
||||
# Have stream preview image start on a new line
|
||||
# Default: no
|
||||
; stream_preview_newline no
|
||||
|
||||
############################################################
|
||||
# HTTP Based Control
|
||||
############################################################
|
||||
|
||||
# TCP/IP port for the http server to listen on (default: 0 = disabled)
|
||||
webcontrol_port 8080
|
||||
|
||||
# Restrict control connections to localhost only (default: on)
|
||||
webcontrol_localhost on
|
||||
|
||||
# Output for http server, select off to choose raw text plain (default: on)
|
||||
webcontrol_html_output on
|
||||
|
||||
# Authentication for the http based control. Syntax username:password
|
||||
# Default: not defined (Disabled)
|
||||
; webcontrol_authentication username:password
|
||||
|
||||
|
||||
############################################################
|
||||
# Tracking (Pan/Tilt)
|
||||
#############################################################
|
||||
|
||||
# Type of tracker (0=none (default), 1=stepper, 2=iomojo, 3=pwc, 4=generic, 5=uvcvideo, 6=servo)
|
||||
# The generic type enables the definition of motion center and motion size to
|
||||
# be used with the conversion specifiers for options like on_motion_detected
|
||||
track_type 0
|
||||
|
||||
# Enable auto tracking (default: off)
|
||||
track_auto off
|
||||
|
||||
# Serial port of motor (default: none)
|
||||
;track_port /dev/ttyS0
|
||||
|
||||
# Motor number for x-axis (default: 0)
|
||||
;track_motorx 0
|
||||
|
||||
# Set motorx reverse (default: 0)
|
||||
;track_motorx_reverse 0
|
||||
|
||||
# Motor number for y-axis (default: 0)
|
||||
;track_motory 1
|
||||
|
||||
# Set motory reverse (default: 0)
|
||||
;track_motory_reverse 0
|
||||
|
||||
# Maximum value on x-axis (default: 0)
|
||||
;track_maxx 200
|
||||
|
||||
# Minimum value on x-axis (default: 0)
|
||||
;track_minx 50
|
||||
|
||||
# Maximum value on y-axis (default: 0)
|
||||
;track_maxy 200
|
||||
|
||||
# Minimum value on y-axis (default: 0)
|
||||
;track_miny 50
|
||||
|
||||
# Center value on x-axis (default: 0)
|
||||
;track_homex 128
|
||||
|
||||
# Center value on y-axis (default: 0)
|
||||
;track_homey 128
|
||||
|
||||
# ID of an iomojo camera if used (default: 0)
|
||||
track_iomojo_id 0
|
||||
|
||||
# Angle in degrees the camera moves per step on the X-axis
|
||||
# with auto-track (default: 10)
|
||||
# Currently only used with pwc type cameras
|
||||
track_step_angle_x 10
|
||||
|
||||
# Angle in degrees the camera moves per step on the Y-axis
|
||||
# with auto-track (default: 10)
|
||||
# Currently only used with pwc type cameras
|
||||
track_step_angle_y 10
|
||||
|
||||
# Delay to wait for after tracking movement as number
|
||||
# of picture frames (default: 10)
|
||||
track_move_wait 10
|
||||
|
||||
# Speed to set the motor to (stepper motor option) (default: 255)
|
||||
track_speed 255
|
||||
|
||||
# Number of steps to make (stepper motor option) (default: 40)
|
||||
track_stepsize 40
|
||||
|
||||
|
||||
############################################################
|
||||
# External Commands, Warnings and Logging:
|
||||
# You can use conversion specifiers for the on_xxxx commands
|
||||
# %Y = year, %m = month, %d = date,
|
||||
# %H = hour, %M = minute, %S = second,
|
||||
# %v = event, %q = frame number, %t = camera id number,
|
||||
# %D = changed pixels, %N = noise level,
|
||||
# %i and %J = width and height of motion area,
|
||||
# %K and %L = X and Y coordinates of motion center
|
||||
# %C = value defined by text_event
|
||||
# %f = filename with full path
|
||||
# %n = number indicating filetype
|
||||
# Both %f and %n are only defined for on_picture_save,
|
||||
# on_movie_start and on_movie_end
|
||||
# Quotation marks round string are allowed.
|
||||
############################################################
|
||||
|
||||
# Do not sound beeps when detecting motion (default: on)
|
||||
# Note: Motion never beeps when running in daemon mode.
|
||||
quiet on
|
||||
|
||||
# Command to be executed when an event starts. (default: none)
|
||||
# An event starts at first motion detected after a period of no motion defined by event_gap
|
||||
; on_event_start value
|
||||
|
||||
# Command to be executed when an event ends after a period of no motion
|
||||
# (default: none). The period of no motion is defined by option event_gap.
|
||||
; on_event_end value
|
||||
|
||||
# Command to be executed when a picture (.ppm|.jpg) is saved (default: none)
|
||||
# To give the filename as an argument to a command append it with %f
|
||||
; on_picture_save value
|
||||
|
||||
# Command to be executed when a motion frame is detected (default: none)
|
||||
; on_motion_detected value
|
||||
|
||||
# Command to be executed when motion in a predefined area is detected
|
||||
# Check option 'area_detect'. (default: none)
|
||||
; on_area_detected value
|
||||
|
||||
# Command to be executed when a movie file (.mpg|.avi) is created. (default: none)
|
||||
# To give the filename as an argument to a command append it with %f
|
||||
; on_movie_start value
|
||||
|
||||
# Command to be executed when a movie file (.mpg|.avi) is closed. (default: none)
|
||||
# To give the filename as an argument to a command append it with %f
|
||||
; on_movie_end value
|
||||
|
||||
# Command to be executed when a camera can't be opened or if it is lost
|
||||
# NOTE: There is situations when motion don't detect a lost camera!
|
||||
# It depends on the driver, some drivers dosn't detect a lost camera at all
|
||||
# Some hangs the motion thread. Some even hangs the PC! (default: none)
|
||||
; on_camera_lost value
|
||||
|
||||
#####################################################################
|
||||
# Common Options for database features.
|
||||
# Options require database options to be active also.
|
||||
#####################################################################
|
||||
|
||||
# Log to the database when creating motion triggered picture file (default: on)
|
||||
; sql_log_picture on
|
||||
|
||||
# Log to the database when creating a snapshot image file (default: on)
|
||||
; sql_log_snapshot on
|
||||
|
||||
# Log to the database when creating motion triggered movie file (default: off)
|
||||
; sql_log_movie off
|
||||
|
||||
# Log to the database when creating timelapse movies file (default: off)
|
||||
; sql_log_timelapse off
|
||||
|
||||
# SQL query string that is sent to the database
|
||||
# Use same conversion specifiers has for text features
|
||||
# Additional special conversion specifiers are
|
||||
# %n = the number representing the file_type
|
||||
# %f = filename with full path
|
||||
# Default value:
|
||||
# Create tables :
|
||||
##
|
||||
# Mysql
|
||||
# CREATE TABLE security (camera int, filename char(80) not null, frame int, file_type int, time_stamp timestamp(14), event_time_stamp timestamp(14));
|
||||
#
|
||||
# Postgresql
|
||||
# CREATE TABLE security (camera int, filename char(80) not null, frame int, file_type int, time_stamp timestamp without time zone, event_time_stamp timestamp without time zone);
|
||||
#
|
||||
# insert into security(camera, filename, frame, file_type, time_stamp, text_event) values('%t', '%f', '%q', '%n', '%Y-%m-%d %T', '%C')
|
||||
; sql_query insert into security(camera, filename, frame, file_type, time_stamp, event_time_stamp) values('%t', '%f', '%q', '%n', '%Y-%m-%d %T', '%C')
|
||||
|
||||
|
||||
############################################################
|
||||
# Database Options
|
||||
############################################################
|
||||
|
||||
# database type : mysql, postgresql, sqlite3 (default : not defined)
|
||||
; database_type value
|
||||
|
||||
# database to log to (default: not defined)
|
||||
# for sqlite3, the full path and name for the database.
|
||||
; database_dbname value
|
||||
|
||||
# The host on which the database is located (default: localhost)
|
||||
; database_host value
|
||||
|
||||
# User account name for database (default: not defined)
|
||||
; database_user value
|
||||
|
||||
# User password for database (default: not defined)
|
||||
; database_password value
|
||||
|
||||
# Port on which the database is located
|
||||
# mysql 3306 , postgresql 5432 (default: not defined)
|
||||
; database_port value
|
||||
|
||||
# Database wait time in milliseconds for locked database to
|
||||
# be unlocked before returning database locked error (default 0)
|
||||
; database_busy_timeout 0
|
||||
|
||||
|
||||
|
||||
############################################################
|
||||
# Video Loopback Device (vloopback project)
|
||||
############################################################
|
||||
|
||||
# Output images to a video4linux loopback device
|
||||
# The value '-' means next available (default: not defined)
|
||||
; video_pipe value
|
||||
|
||||
# Output motion images to a video4linux loopback device
|
||||
# The value '-' means next available (default: not defined)
|
||||
; motion_video_pipe value
|
||||
|
||||
|
||||
##############################################################
|
||||
# camera config files - One for each camera.
|
||||
# Except if only one camera - You only need this config file.
|
||||
# If you have more than one camera you MUST define one camera
|
||||
# config file for each camera in addition to this config file.
|
||||
##############################################################
|
||||
|
||||
# Remember: If you have more than one camera you must have one
|
||||
# camera file for each camera. E.g. 2 cameras requires 3 files:
|
||||
# This motion.conf file AND camera1.conf and camera2.conf.
|
||||
# Only put the options that are unique to each camera in the
|
||||
# camera config files.
|
||||
; camera /etc/motion/camera1.conf
|
||||
; camera /etc/motion/camera2.conf
|
||||
; camera /etc/motion/camera3.conf
|
||||
; camera /etc/motion/camera4.conf
|
||||
|
||||
|
||||
##############################################################
|
||||
# Camera config directory - One for each camera.
|
||||
##############################################################
|
||||
#
|
||||
; camera_dir /etc/motion/conf.d
|
||||
Reference in New Issue
Block a user